— execute a command as another
sudo allows a permitted user to execute a
command as the superuser or another user, as specified
by the security policy. The invoking user's real (not
effective) user-ID is used to determine the user
name with which to query the security policy.
sudo supports a plugin architecture for
security policies and input/output logging. Third parties can develop and
distribute their own policy and I/O logging plugins to work seamlessly with
sudo front end. The default security policy is
sudoers, which is configured via the file
/etc/sudoers, or via LDAP. See the
Plugins section for more information.
The security policy determines what privileges, if any, a user has
sudo. The policy may require that users
authenticate themselves with a password or another authentication mechanism.
If authentication is required,
sudo will exit if the
user's password is not entered within a configurable time limit. This limit
is policy-specific; the default password prompt timeout for the
sudoers security policy is
Security policies may support credential
caching to allow the user to run
sudo again for a
period of time without requiring authentication. By default, the
sudoers policy caches credentials on a per-terminal basis
5 minutes. See the
options in sudoers(5) for
more information. By running
sudo with the
-v option, a user can update the cached credentials
without running a command.
On systems where
sudo is the primary
method of gaining superuser privileges, it is imperative to avoid syntax
errors in the security policy configuration files. For the default security
changes to the configuration files should be made using the
visudo(8) utility which
will ensure that no syntax errors are introduced.
When invoked as
-e option (described below), is implied.
Security policies may log successful and failed attempts to use
sudo. If an I/O plugin is configured, the running
command's input and output may be logged as well.
The options are as follows:
- Normally, if
sudorequires a password, it will read it from the user's terminal. If the
-A(askpass) option is specified, a (possibly graphical) helper program is executed to read the user's password and output the password to the standard output. If the
SUDO_ASKPASSenvironment variable is set, it specifies the path to the helper program. Otherwise, if sudo.conf(5) contains a line specifying the askpass program, that value will be used. For example:
# Path to askpass helper program Path askpass /usr/X11R6/bin/ssh-askpass
If no askpass program is available,
sudowill exit with an error.
- Use the specified BSD authentication type when validating the user, if allowed by /etc/login.conf. The system administrator may specify a list of sudo-specific authentication methods by adding an “auth-sudo” entry in /etc/login.conf. This option is only available on systems that support BSD authentication.
- Ring the bell as part of the password promp when a terminal is present. This option has no effect if an askpass program is used.
- Run the given command in the background. Note that it is not possible to
use shell job control to manipulate background processes started by
sudo. Most interactive commands will fail to work properly in background mode.
- Close all file descriptors greater than or equal to
num before executing a command. Values less than
three are not permitted. By default,
sudowill close all open file descriptors other than standard input, standard output and standard error when executing a command. The security policy may restrict the user's ability to use this option. The sudoers policy only permits use of the
-Coption when the administrator has enabled the closefrom_override option.
- Run the command with resource limits and scheduling priority of the
specified login class. The
class argument can be either a class name as defined
in /etc/login.conf, or a single
-’ character. If class is
-, the default login class of the target user will be used. Otherwise, the command must be run as the superuser (user-ID 0), or
sudomust be run from a shell that is already running as the superuser. If the command is being run as a login shell, additional /etc/login.conf settings, such as the umask and environment variables, will be applied, if present. This option is only available on systems with BSD login classes.
- Run the command in the specified directory instead of the current working directory. The security policy may return an error if the user does not have permission to specify the working directory.
- Indicates to the security policy that the user wishes to preserve their existing environment variables. The security policy may return an error if the user does not have permission to preserve the environment.
- Indicates to the security policy that the user wishes to add the comma-separated list of environment variables to those preserved from the user's environment. The security policy may return an error if the user does not have permission to preserve the environment. This option may be specified multiple times.
- Edit one or more files instead of running a command. In lieu of a path
name, the string "sudoedit" is used when consulting the security
policy. If the user is authorized by the policy, the following steps are
- Temporary copies are made of the files to be edited with the owner set to the invoking user.
- The editor specified by the policy is run to edit the
temporary files. The sudoers policy uses the
EDITORenvironment variables (in that order). If none of
EDITORare set, the first program listed in the editor sudoers(5) option is used.
- If they have been modified, the temporary files are copied back to their original location and the temporary versions are removed.
To help prevent the editing of unauthorized files, the following restrictions are enforced unless explicitly allowed by the security policy:
- Symbolic links may not be edited (version 1.8.15 and higher).
- Symbolic links along the path to be edited are not followed when the parent directory is writable by the invoking user unless that user is root (version 1.8.16 and higher).
- Files located in a directory that is writable by the invoking user may not be edited unless that user is root (version 1.8.16 and higher).
Users are never allowed to edit device special files.
If the specified file does not exist, it will be created. Note that unlike most commands run by sudo, the editor is run with the invoking user's environment unmodified. If the temporary file becomes empty after editing, the user will be prompted before it is installed. If, for some reason,
sudois unable to update a file with its edited version, the user will receive a warning and the edited copy will remain in a temporary file.
- Run the command with the primary group set to group
instead of the primary group specified by the target user's password
database entry. The group may be either a group name
or a numeric group-ID (GID) prefixed with the
#’ character (e.g.,
#0for GID 0). When running a command as a GID, many shells require that the ‘
#’ be escaped with a backslash (‘
\’). If no
-uoption is specified, the command will be run as the invoking user. In either case, the primary group will be set to group. The sudoers policy permits any of the target user's groups to be specified via the
-goption as long as the
-Poption is not in use.
- Request that the security policy set the
HOMEenvironment variable to the home directory specified by the target user's password database entry. Depending on the policy, this may be the default behavior.
- Display a short help message to the standard output and exit.
- Run the command on the specified host if the
security policy plugin supports remote commands. Note that the
sudoers plugin does not currently support running remote
commands. This may also be used in conjunction with the
-loption to list a user's privileges for the remote host.
- Run the shell specified by the target user's password database entry as a
login shell. This means that login-specific resource files such as
.profile, .bash_profile or
.login will be read by the shell. If a command is
specified, it is passed to the shell for execution via the shell's
-coption. If no command is specified, an interactive shell is executed.
sudoattempts to change to that user's home directory before running the shell. The command is run with an environment similar to the one a user would receive at log in. Note that most shells behave differently when a command is specified as compared to an interactive session; consult the shell's manual for details. The Command environment section in the sudoers(5) manual documents how the
-ioption affects the environment in which a command is run when the sudoers policy is in use.
- Similar to the
-koption, except that it removes the user's cached credentials entirely and may not be used in conjunction with a command or other option. This option does not require a password. Not all security policies support credential caching.
- When used without a command, invalidates the user's cached credentials. In
other words, the next time
sudois run a password will be required. This option does not require a password and was added to allow a user to revoke
sudopermissions from a .logout file.
When used in conjunction with a command or an option that may require a password, this option will cause
sudoto ignore the user's cached credentials. As a result,
sudowill prompt for a password (if one is required by the security policy) and will not update the user's cached credentials.
Not all security policies support credential caching.
- If no command is specified, list the allowed (and
forbidden) commands for the invoking user (or the user specified by the
-Uoption) on the current host. A longer list format is used if this option is specified multiple times and the security policy supports a verbose output format.
If a command is specified and is permitted by the security policy, the fully-qualified path to the command is displayed along with any command line arguments. If a command is specified but not allowed by the policy,
sudowill exit with a status value of 1.
- Avoid prompting the user for input of any kind. If a password is required
for the command to run,
sudowill display an error message and exit.
- Preserve the invoking user's group vector unaltered. By default, the sudoers policy will initialize the group vector to the list of groups the target user is a member of. The real and effective group-IDs, however, are still set to match the target user.
- Use a custom password prompt with optional escape sequences. The following
%’) escape sequences are supported by the sudoers policy:
- expanded to the host name including the domain name (on if the machine's host name is fully qualified or the fqdn option is set in sudoers(5))
- expanded to the local host name without the domain name
- expanded to the name of the user whose password is being requested (respects the rootpw, targetpw, and runaspw flags in sudoers(5))
- expanded to the login name of the user the command will be run as
(defaults to root unless the
-uoption is also specified)
- expanded to the invoking user's login name
- two consecutive ‘
%’ characters are collapsed into a single ‘
The custom prompt will override the default prompt specified by either the security policy or the
SUDO_PROMPTenvironment variable. On systems that use PAM, the custom prompt will also override the prompt specified by a PAM module unless the passprompt_override flag is disabled in sudoers.
- Change to the specified root directory (see chroot(8)) before running the command. The security policy may return an error if the user does not have permission to specify the root directory.
- Run the command with an SELinux security context that includes the specified role.
- Write the prompt to the standard error and read the password from the standard input instead of using the terminal device.
- Run the shell specified by the
SHELLenvironment variable if it is set or the shell specified by the invoking user's password database entry. If a command is specified, it is passed to the shell for execution via the shell's
-coption. If no command is specified, an interactive shell is executed. Note that most shells behave differently when a command is specified as compared to an interactive session; consult the shell's manual for details.
- Run the command with an SELinux security context that includes the specified type. If no type is specified, the default type is derived from the role.
- Used in conjunction with the
-loption to list the privileges for user instead of for the invoking user. The security policy may restrict listing other users' privileges. The sudoers policy only allows root or a user with the
ALLprivilege on the current host to use this option.
- Used to set a timeout for the command. If the timeout expires before the command has exited, the command will be terminated. The security policy may restrict the ability to set command timeouts. The sudoers policy requires that user-specified timeouts be explicitly enabled.
- Run the command as a user other than the default target user (usually
The user may be either a user name or a numeric
user-ID (UID) prefixed with the ‘
#’ character (e.g.,
#0for UID 0). When running commands as a UID, many shells require that the ‘
#’ be escaped with a backslash (‘
\’). Some security policies may restrict UIDs to those listed in the password database. The sudoers policy allows UIDs that are not in the password database as long as the targetpw option is not set. Other security policies may not support this.
- Print the
sudoversion string as well as the version string of the security policy plugin and any I/O plugins. If the invoking user is already root the
-Voption will display the arguments passed to configure when
sudowas built and plugins may display more verbose information such as default options.
- Update the user's cached credentials, authenticating the user if
necessary. For the sudoers plugin, this extends the
sudotimeout for another
5minutes by default, but does not run a command. Not all security policies support cached credentials.
--option indicates that
sudoshould stop processing command line arguments.
Options that take a value may only be specified once unless
otherwise indicated in the description. This is to help guard against
problems caused by poorly written scripts that invoke
sudo with user-controlled input.
Environment variables to be set for the command may
also be passed on the command line in the form of
Variables passed on the command line are subject to restrictions imposed by
the security policy plugin. The sudoers policy subjects
variables passed on the command line to the same restrictions as normal
environment variables with one important exception. If the
setenv option is
set in sudoers, the command to be run has the
SETENV tag set or the command matched is
ALL, the user may set variables that would otherwise
be forbidden. See sudoers(5) for more information.
sudo executes a command, the security
policy specifies the execution environment for the command. Typically, the
real and effective user and group and IDs are set to match those of the
target user, as specified in the password database, and the group vector is
initialized based on the group database (unless the
-P option was specified).
The following parameters may be specified by security policy:
- real and effective user-ID
- real and effective group-ID
- supplementary group-IDs
- the environment list
- current working directory
- file creation mode mask (umask)
- SELinux role and type
- Solaris project
- Solaris privileges
- BSD login class
- scheduling priority (aka nice value)
There are two distinct ways
sudo can run a
If an I/O logging plugin is configured or if the security policy
explicitly requests it, a new pseudo-terminal (“pty”) is
allocated and fork(2) is used
to create a second
sudo process, referred to as the
monitor. The monitor creates a new
terminal session with itself as the leader and the pty as its controlling
terminal, calls fork(2), sets
up the execution environment as described above, and then uses the
execve(2) system call to
run the command in the child process. The monitor exists
to relay job control signals between the user's existing terminal and the
pty the command is being run in. This makes it possible to suspend and
resume the command. Without the monitor, the command would be in what POSIX
terms an “orphaned process group” and it would not receive any
job control signals from the kernel. When the command exits or is terminated
by a signal, the monitor passes the command's exit status
to the main
sudo process and exits. After receiving
the command's exit status, the main
sudo passes the
command's exit status to the security policy's close function and exits.
If no pty is used,
fork(2), sets up the
execution environment as described above, and uses the
execve(2) system call to
run the command in the child process. The main
process waits until the command has completed, then passes the command's
exit status to the security policy's close function and exits. As a special
case, if the policy plugin does not define a close function,
sudo will execute the command directly instead of
calling fork(2) first. The
sudoers policy plugin will only define a close function
when I/O logging is enabled, a pty is required, or the
pam_session or pam_setcred options are
enabled. Note that pam_session and
pam_setcred are enabled by default on systems using
On systems that use PAM, the security policy's close function is responsible for closing the PAM session. It may also log the command's exit status.
When the command is run as a child of the
relay signals it receives to the command. The
SIGQUIT signals are only relayed when the
command is being run in a new pty or when the signal was sent by a user
process, not the kernel. This prevents the command from receiving
SIGINT twice each time the user enters control-C.
Some signals, such as
SIGKILL, cannot be caught and thus will not be
relayed to the command. As a general rule,
should be used instead of
SIGSTOP when you wish to
suspend a command being run by
As a special case,
sudo will not
relay signals that were sent by the command it is running. This prevents the
command from accidentally killing itself. On some systems, the
reboot(8) command sends
SIGTERM to all non-system processes other than
itself before rebooting the system. This prevents
sudo from relaying the
SIGTERM signal it received back to
reboot(8), which might then
exit before the system was actually rebooted, leaving it in a half-dead
state similar to single user mode. Note, however, that this check only
applies to the command run by
sudo and not any other
processes that the command may create. As a result, running a script that
calls reboot(8) or
sudo may cause the system to end up in this
undefined state unless the reboot(8) or shutdown(8) are run using the
of functions instead of
(which interposes a shell between the command and the calling process).
If no I/O logging plugins are loaded and the policy
plugin has not defined a
function, set a command timeout or required that the command be run in a new
sudo may execute the command directly instead
of running it as a child process.
Plugins may be specified via
directives in the sudo.conf(5) file. They may be loaded as dynamic shared objects (on
systems that support them), or compiled directly into the
sudo binary. If no
sudo.conf(5) file is
present, or if it doesn't contain any
sudo will use sudoers(5) for the policy, auditing and I/O logging plugins.
See the sudo.conf(5)
manual for details of the /etc/sudo.conf file and
manual for more information about the
Upon successful execution of a command, the exit status from
sudo will be the exit status of the program that was
executed. If the command terminated due to receipt of a signal,
sudo will send itself the same signal that
terminated the command.
-l option was specified without a
sudo will exit with a value of 0 if the
user is allowed to run
sudo and they authenticated
successfully (as required by the security policy). If a command is specified
-l option, the exit value will only be 0 if
the command is permitted by the security policy, otherwise it will be 1.
If there is an authentication failure, a configuration/permission
problem or if the given command cannot be executed,
sudo exits with a value of 1. In the latter case,
the error string is printed to the standard error. If
sudo cannot stat(2) one or more entries in the user's
PATH, an error is printed to the standard error. (If
the directory does not exist or if it is not really a directory, the entry
is ignored and no error is printed.) This should not happen under normal
circumstances. The most common reason for stat(2) to return “permission denied” is if you
are running an automounter and one of the directories in your
PATH is on a machine that is currently
sudo tries to be safe when executing
To prevent command spoofing,
"." and "" (both denoting current directory) last when
searching for a command in the user's
PATH (if one
or both are in the
PATH). Note, however, that the
PATH environment variable is
not modified and is passed unchanged to the program that
never be granted
sudo privileges to execute files that are writable
by the user or that reside in a directory that is writable by the user. If
the user can modify or replace the command there is no way to limit what
additional commands they can run.
Please note that
normally only log the command it explicitly runs. If a user runs a command
sudo su or
subsequent commands run from that shell are not subject to
sudo's security policy. The same is true for
commands that offer shell escapes (including most editors). If I/O logging
is enabled, subsequent commands will have their input and/or output logged,
but there will not be traditional logs for those commands. Because of this,
care must be taken when giving users access to commands via
sudo to verify that the command does not
inadvertently give the user an effective root shell. For more information,
please see the
escapes section in sudoers(5).
To prevent the disclosure of potentially sensitive information,
sudo disables core dumps by default while it is
executing (they are re-enabled for the command that is run). This historical
practice dates from a time when most operating systems allowed set-user-ID
processes to dump core by default. To aid in debugging
sudo crashes, you may wish to re-enable core dumps
by setting “disable_coredump” to false in the
sudo.conf(5) file as
Set disable_coredump false
See the sudo.conf(5) manual for more information.
sudo utilizes the following environment
variables. The security policy has control over the actual content of the
- Default editor to use in
-e(sudoedit) mode if neither
- Set to the mail spool of the target user when the
-ioption is specified or when env_reset is enabled in sudoers (unless
- Set to the home directory of the target user when the
-Hoptions are specified, when the
-soption is specified and set_home is set in sudoers, when always_set_home is enabled in sudoers, or when env_reset is enabled in sudoers and HOME is not present in the env_keep list.
- Set to the login name of the target user when the
-ioption is specified, when the set_logname option is enabled in sudoers or when the env_reset option is enabled in sudoers (unless
LOGNAMEis present in the env_keep list).
- May be overridden by the security policy.
- Used to determine shell to run with
- Specifies the path to a helper program used to read the password if no
terminal is available or if the
-Aoption is specified.
- Set to the command run by sudo, including command line arguments. The command line arguments are truncated at 4096 characters to prevent a potential execution error.
- Default editor to use in
- Set to the group-ID of the user who invoked sudo.
- Used as the default password prompt unless the
-poption was specified.
- If set,
PS1will be set to its value for the program being run.
- Set to the user-ID of the user who invoked sudo.
- Set to the login name of the user who invoked sudo.
- Set to the same value as
LOGNAME, described above.
- Default editor to use in
-e(sudoedit) mode if
SUDO_EDITORis not set.
sudofront end configuration
Note: the following examples assume a properly configured security policy.
To get a file listing of an unreadable directory:
$ sudo ls /usr/local/protected
To list the home directory of user yaz on a machine where the file system holding ~yaz is not exported as root:
$ sudo -u yaz ls ~yaz
To edit the index.html file as user www:
$ sudoedit -u www ~www/htdocs/index.html
To view system logs only accessible to root and users in the adm group:
$ sudo -g adm more /var/log/syslog
To run an editor as jim with a different primary group:
$ sudoedit -u jim -g audio ~jim/sound.txt
To shut down a machine:
$ sudo shutdown -r +15 "quick reboot"
To make a usage listing of the directories in the /home partition.
Note that this runs the commands in a sub-shell to make the
cd and file redirection work.
$ sudo sh -c "cd /home ; du -s * | sort -rn > USAGE"
Error messages produced by
editing files in a writable directory is not permitted
- By default,
sudoeditdoes not permit editing a file when any of the parent directories are writable by the invoking user. This avoids a race condition that could allow the user to overwrite an arbitrary file. See the sudoedit_checkdir option in sudoers(5) for more information.
editing symbolic links is not permitted
- By default,
sudoeditdoes not follow symbolic links when opening files. See the sudoedit_follow option in sudoers(5) for more information.
effective uid is not 0, is sudo installed setuid root?
sudowas not run with root privileges. The
sudobinary must be owned by the root user and have the set-user-ID bit set. Also, it must not be located on a file system mounted with the ‘nosuid’ option or on an NFS file system that maps uid 0 to an unprivileged uid.
effective uid is not 0, is sudo on a file system with the 'nosuid' option set or an NFS file system without root privileges?
sudowas not run with root privileges. The
sudobinary has the proper owner and permissions but it still did not run with root privileges. The most common reason for this is that the file system the
sudobinary is located on is mounted with the ‘nosuid’ option or it is an NFS file system that maps uid 0 to an unprivileged uid.
fatal error, unable to load plugins
- An error occurred while loading or initializing the plugins specified in sudo.conf(5).
invalid environment variable name
- One or more environment variable names specified via the
-Eoption contained an equal sign (‘
=’). The arguments to the
-Eoption should be environment variable names without an associated value.
no password was provided
sudotried to read the password, it did not receive any characters. This may happen if no terminal is available (or the
-Soption is specified) and the standard input has been redirected from /dev/null.
a terminal is required to read the password
sudoneeds to read the password but there is no mechanism available for it to do so. A terminal is not present to read the password from,
sudohas not been configured to read from the standard input, the
-Soption was not used, and no askpass helper has been specified either via the sudo.conf(5) file or the
no writable temporary directory found
sudoeditwas unable to find a usable temporary directory in which to store its intermediate files.
sudo must be owned by uid 0 and have the setuid bit set
sudowas not run with root privileges. The
sudobinary does not have the correct owner or permissions. It must be owned by the root user and have the set-user-ID bit set.
sudoedit is not supported on this platform
- It is only possible to run
sudoediton systems that support setting the effective user-ID.
timed out reading password
- The user did not enter a password before the password timeout (5 minutes by default) expired.
you do not exist in the passwd database
- Your user-ID does not appear in the system passwd database.
you may not specify environment variables in edit mode
- It is only possible to specify environment variables when running a command. When editing a file, the editor is run with the user's environment unmodified.
See the HISTORY file in the
distribution (https://www.sudo.ws/history.html) for a brief history of
Many people have worked on
sudo over the
years; this version consists of code written primarily by:
See the CONTRIBUTORS file in the
distribution (https://www.sudo.ws/contributors.html) for an exhaustive list
of people who have contributed to
There is no easy way to prevent a user from gaining a root shell
if that user is allowed to run arbitrary commands via
sudo. Also, many programs (such as editors) allow
the user to run commands via shell escapes, thus avoiding
sudo's checks. However, on most systems it is
possible to prevent shell escapes with the
It is not meaningful to run the
directly via sudo, e.g.,
$ sudo cd /usr/local/protected
since when the command exits the parent process (your shell) will still be the same. Please see the EXAMPLES section for more information.
Running shell scripts via
sudo can expose
the same kernel bugs that make set-user-ID shell scripts unsafe on some
operating systems (if your OS has a /dev/fd/ directory, set-user-ID shell
scripts are generally safe).
If you feel you have found a bug in
please submit a bug report at https://bugzilla.sudo.ws/
Limited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.
sudo is provided “AS IS” and
any express or implied warranties, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose
are disclaimed. See the LICENSE file distributed with
sudo or https://www.sudo.ws/license.html for