Sudo Stable Release

Current Stable Release

The current stable release of the sudo 1.9 branch is version 1.9.8p2. For the sudo 1.8 branch, see legacy releases.

For full details of all changes, see the ChangeLog file or view the commit history via mercurial or GitHub

Major changes between version 1.9.8p2 and 1.9.8p1:

  • Fixed a potential out-of-bounds read with sudo -i when the target user's shell is bash. This is a regression introduced in sudo 1.9.8. Bug #998.

  • sudo_logsrvd now only sends a log ID for first command of a session. There is no need to send the log ID for each sub-command.

  • Fixed a few minor memory leaks in intercept mode.

  • Fixed a problem with sudo_logsrvd in relay mode if store_first was enabled when handling sub-commands. A new zero-length journal file was created for each sub-command instead of simply using the existing journal file.

Major changes between version 1.9.8p1 and 1.9.8:

  • Fixed support for passing a prompt (sudo -p) or a login class (sudo -c) on the command line. This is a regression introduced in sudo 1.9.8. Bug #993.

  • Fixed a crash with sudo ALL rules in the LDAP and SSSD back-ends. This is a regression introduced in sudo 1.9.8. Bug #994.

  • Fixed a compilation error when the --enable-static-sudoers configure option was specified. This is a regression introduced in sudo 1.9.8 caused by a symbol clash with the intercept and log server protobuf functions.

Major changes between version 1.9.8 and 1.9.7p2:

  • It is now possible to transparently intercepting sub-commands executed by the original command run via sudo. Intercept support is implemented using LD_PRELOAD (or the equivalent supported by the system) and so has some limitations. The two main limitations are that only dynamic executables are supported and only the execl, execle, execlp, execv, execve, execvp, and execvpe library functions are currently intercepted. Its main use case is to support restricting privileged shells run via sudo.

    To support this, there is a new intercept Defaults setting and an INTERCEPT command tag that can be used in sudoers. For example:

    	Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh
    	Defaults!SHELLS intercept
    would cause sudo to run the listed shells in intercept mode. This can also be set on a per-rule basis. For example:
    	Cmnd_Alias SHELLS=/bin/bash, /bin/sh, /bin/csh, /bin/ksh, /bin/zsh

    would only apply intercept mode to user chuck when running one of the listed shells.

    In intercept mode, sudo will not prompt for a password before running a sub-command and will not allow a set-user-ID or set-group-ID program to be run by default. The new intercept_authenticate and sudoers settings can be used to change this behavior.

  • The new log_subcmds sudoers setting can be used to log commands run in a privileged shell. It uses the same mechanism as the intercept support described above and has the same limitations.

  • The new log_exit_status sudoers setting can be used to log the exit status commands run via sudo. This is also a corresponding log_exit setting in the sudo_logsrvd.conf eventlog stanza.

  • Support for logging sudo_logsrvd errors via syslog or to a file. Previously, most sudo_logsrvd errors were only visible in the debug log.

  • Better diagnostics when there is a TLS certificate validation error.

  • Using the += or -= operators in a Defaults setting that takes a string, not a list, now produces a warning from sudo and a syntax error from inside visudo.

  • Fixed a bug where the iolog_mode setting in sudoers and sudo_logsrvd had no effect when creating I/O log parent directories if the I/O log file name ended with the string XXXXXX.

  • Fixed a bug in the sudoers custom prompt code where the size parameter that was passed to the strlcpy() function was incorrect. No overflow was possible since the correct amount of memory was already pre-allocated.

  • The mksigname and mksiglist helper programs are now built with the host compiler, not the target compiler, when cross-compiling. Bug #989.

  • Fixed compilation error when the --enable-static-sudoers configure option was specified. This was due to a typo introduced in sudo 1.9.7. GitHub PR #113.

Major changes between version 1.9.7p2 and 1.9.7p1:

  • When formatting JSON output, octal numbers are now stored as strings, not numbers. The JSON spec does not actually support octal numbers with a 0 prefix.

  • Fixed a compilation issue on Solaris 9.

  • Sudo now can handle the getgroups() function returning a different number of groups for subsequent invocations. GitHub PR #106.

  • When loading a Python plugin, now verifies that the module loaded matches the one we tried to load. This allows sudo to display a more useful error message when trying to load a plugin with a name that conflicts with a Python module installed in the system location.

  • Sudo no longer sets the the open files resource limit to unlimited while it runs. This avoids a problem where sudo's closefrom() emulation would need to close a very large number of descriptors on systems without a way to determine which ones are actually open.

  • Sudo now includes a configure check for va_copy or __va_copy and only defines its own version if the configure test fails.

  • Fixed a bug in sudo's utmp file handling which prevented old entries from being reused. As a result, the utmp (or utmpx) file was appended to unnecessarily. GitHub PR #107.

  • Fixed a bug introduced in sudo 1.9.7 that prevented sudo_logsrvd from accepting TLS connections when OpenSSL is used. Bug #988.

Major changes between version 1.9.7p1 and 1.9.7:

  • Fixed an SELinux sudoedit bug when the edited temporary file could not be opened. The sesh helper would still be run even when there are no temporary files available to install.

  • Fixed a compilation problem on FreeBSD.

  • The file is now built as a module on all systems other than macOS. This makes it possible to use other libtool implementations such as slibtool. On macOS shared libraries and modules are not interchangeable and the version of libtool shipped with sudo must be used.

  • Fixed a few bugs in the getgrouplist() emulation on Solaris when reading from the local group file.

  • Fixed a bug in sudo_logsrvd that prevented periodic relay server connection retries from occurring in store_first mode.

  • Disabled the nss_search()-based getgrouplist() emulation on HP-UX due to a crash when the group source is set to compat in /etc/nsswitch.conf. This is probably due to a mismatch between include/compat/nss_dbdefs.h and what HP-UX uses internally. On HP-UX we now just cycle through groups the slow way using getgrent(). Bug #978.

Major changes between version 1.9.7 and 1.9.6p1:

  • The fuzz Makefile target now runs all the fuzzers for 8192 passes (can be overridden via the FUZZ_RUNS variable). This makes it easier to run the fuzzers in-tree. To run a fuzzer indefinitely, set FUZZ_RUNS=-1, e.g. make FUZZ_RUNS=-1 fuzz.

  • Fixed fuzzing on FreeBSD where the ld.lld linker returns an error by default when a symbol is multiply-defined.

  • Added support for determining local IPv6 addresses on systems that lack the getifaddrs() function. This now works on AIX, HP-UX and Solaris (at least). Bug #969.

  • Fixed a bug introduced in sudo 1.9.6 that caused sudo -V to report a usage error. Also, when invoked as sudoedit, sudo now allows a more restricted set of options that matches the usage statement and documentation. GitHub Issue #95.

  • Fixed a crash in sudo_sendlog when the specified certificate or key does not exist or is invalid. Bug #970.

  • Fixed a compilation error when sudo is configured with the disable-log-clientoption.

  • Sudo's limited support for SUCCESS=return entries in nsswitch.conf is now documented. Bug #971.

  • Sudo now requires autoconf 2.70 or higher to regenerate the configure script. Bug #972.

  • sudo_logsrvd now has a relay mode which can be used to create a hierarchy of log servers. By default, when a relay server is defined, messages from the client are forwarded immediately to the relay. However, if the store_first setting is enabled, the log will be stored locally until the command completes and then relayed. Bug #965.

  • Sudo now links with OpenSSL by default if it is available unless the --disable-openssl configure option is used or both the --disable-log-client and --disable-log-server configure options are specified.

  • Fixed configure's Python version detection when the version minor number is more than a single digit, for example Python 3.10.

  • The sudo Python module tests now pass for Python 3.10.

  • Sudo will now avoid changing the datasize resource limit as long as the existing value is at least 1GB. This works around a problem on 64-bit HP-UX where it is not possible to exactly restore the original datasize limit. Bug #973.

  • Fixed a race condition that could result in a hang when sudo is executed by a process where the SIGCHLD handler is set to SIG_IGN. This fixes the bug described by GitHub PR #98.

  • Fixed an out-of-bounds read in sudoedit and visudo when the EDITOR, VISUAL or SUDO_EDITOR environment variables end in an unescaped backslash. Also fixed the handling of quote characters that are escaped by a backslash. GitHub Issue #99.

  • Fixed a bug that prevented the log_server_verify sudoers option from taking effect.

  • The sudo_sendlog utility has a new -s option to cause it to stop sending I/O records after a user-specified elapsed time. This can be used to test the I/O log restart functionality of sudo_logsrvd.

  • Fixed a crash introduced in sudo 1.9.4 in sudo_logsrvd when attempting to restart an interrupted I/O log transfer.

  • The TLS connection timeout in the sudoers log client was previously hard-coded to 10 seconds. It now uses the value of log_server_timeout.

  • The configure script now outputs a summary of the user-configurable options at the end, separate from output of configure script tests. Bug #820.

  • Corrected the description of which groups may be specified via the -g option in the Runas_Spec section. Bug #975.

Major changes between version 1.9.6p1 and 1.9.6:

  • Fixed a regression introduced in sudo 1.9.6 that resulted in an error message instead of a usage message when sudo is run with no arguments.

Major changes between version 1.9.6 and 1.9.5p2:

  • Fixed a sudo_sendlog compilation problem with the AIX xlC compiler.

  • Fixed a regression introduced in sudo 1.9.4 where the --disable-root-mailer configure option had no effect.

  • Added a --disable-leaks configure option that avoids some memory leaks on exit that would otherwise occur. This is intended to be used with development tools that measure memory leaks. It is not safe to use in production at this time.

  • Plugged some memory leaks identified by oss-fuzz and ASAN.

  • Fixed the handling of sudoOptions for an LDAP sudoRole that contains multiple sudoCommands. Previously, some of the options would only be applied to the first sudoCommand.

  • Fixed a potential out of bounds read in the parsing of NOTBEFORE and NOTAFTER sudoers command options (and their LDAP equivalents).

  • The parser used for reading I/O log JSON files is now more resilient when processing invalid JSON.

  • Fixed typos that prevented make uninstall from working. GitHub issue #87.

  • Fixed a regression introduced in sudo 1.9.4 where the last line in a sudoers file might not have a terminating NUL character added if no newline was present.

  • Integrated oss-fuzz and LLVM's libFuzzer with sudo. The new --enable-fuzzer configure option can be combined with the --enable-sanitizer option to build sudo with fuzzing support. Multiple fuzz targets are available for fuzzing different parts of sudo. Fuzzers are built and tested via make fuzz or as part of make check (even when sudo is not built with fuzzing support). Fuzzing support currently requires the LLVM clang compiler (not gcc).

  • Fixed the --enable-static-sudoers configure option. GitHub issue #92.

  • Fixed a potential out of bounds read sudo when is run by a user with more groups than the value of max_groups in sudo.conf.

  • Added an admin_flag sudoers option to make the use of the ~/.sudo_as_admin_successful file configurable on systems where sudo is build with the --enable-admin-flag configure option. This mostly affects Ubuntu and its derivatives. GitHub issue #56.

  • The max_groups setting in sudo.conf is now limited to 1024. This setting is obsolete and should no longer be needed.

  • Fixed a bug in the tilde expansion of CHROOT=dir and CWD=dir sudoers command options. A path ~/foo was expanded to /home/userfoo instead of /home/user/foo. This also affects the runchroot and runcwd Defaults settings.

  • Fixed a bug on systems without a native getdelim(3) function where very long lines could cause parsing of the sudoers file to end prematurely. Bug #960.

  • Fixed a potential integer overflow when converting the timestamp_timeout and passwd_timeout sudoers settings to a timespec struct.

  • The default for the group_source setting in sudo.conf is now dynamic on macOS. Recent versions of macOS do not reliably return all of a user's non-local groups via getgroups(2), even when _DARWIN_UNLIMITED_GETGROUPS is defined. Bug #946.

  • Fixed a potential use-after-free in the PAM conversation function. Bug #967.

  • Fixed potential redefinition of sys/stat.h macros in sudo_compat.h. Bug #968.

Major changes between version 1.9.5p2 and 1.9.5p1:

  • Fixed sudo's setprogname(3) emulation on systems that don't provide it.

  • Fixed a problem with the sudoers log server client where a partial write to the server could result the sudo process consuming large amounts of CPU time due to a cycle in the buffer queue. Bug #954.

  • Added a missing dependency on libsudo_util in libsudo_eventlog. Fixes a link error when building sudo statically.

  • The user's KRB5CCNAME environment variable is now preserved when performing PAM authentication. This fixes GSSAPI authentication when the user has a non-default ccache.

  • When invoked as sudoedit, the same set of command line options are now accepted as for sudo -e. The -H and -P options are now rejected for sudoedit and sudo -e which matches the sudo 1.7 behavior. This is part of the fix for CVE-2021-3156.

  • Fixed a potential buffer overflow when unescaping backslashes in the command's arguments. Normally, sudo escapes special characters when running a command via a shell (sudo -s or sudo -i). However, it was also possible to run sudoedit with the -s or -i flags in which case no escaping had actually been done, making a buffer overflow possible. This fixes CVE-2021-3156.

Major changes between version 1.9.5p1 and 1.9.5:

  • Fixed a regression introduced in sudo 1.9.5 where the editor run by sudoedit was set-user-ID root unless SELinux RBAC was in use. The editor is now run with the user's real and effective user-IDs.

Major changes between version 1.9.5 and 1.9.4p2:

  • Fixed a crash introduced in 1.9.4 when running sudo -i as an unknown user. This is related to but distinct from Bug #948.

  • If the lecture_file setting is enabled in sudoers, it must now refer to a regular file or a symbolic link to a regular file.

  • Fixed a potential use-after-free bug in sudo_logsrvd when the server shuts down if there are existing connections from clients that are only logging events and not session I/O data.

  • Fixed a buffer size mismatch when serializing the list of IP addresses for configured network interfaces. This bug is not actually exploitable since the allocated buffer is large enough to hold the list of addresses.

  • If sudo is executed with a name other than sudo or sudoedit, it will now fall back to sudo as the program name. This affects warning, help and usage messages as well as the matching of Debug lines in the /etc/sudo.conf file. Previously, it was possible for the invoking user to manipulate the program name by setting argv[0] to an arbitrary value when executing sudo.

  • Sudo now checks for failure when setting the close-on-exec flag on open file descriptors. This should never fail but, if it were to, there is the possibility of a file descriptor leak to a child process (such as the command sudo runs).

  • Fixed CVE-2021-23239, a potential information leak in sudoedit that could be used to test for the existence of directories not normally accessible to the user in certain circumstances. When creating a new file, sudoedit checks to make sure the parent directory of the new file exists before running the editor. However, a race condition exists if the invoking user can replace (or create) the parent directory. If a symbolic link is created in place of the parent directory, sudoedit will run the editor as long as the target of the link exists. If the target of the link does not exist, an error message will be displayed. The race condition can be used to test for the existence of an arbitrary directory. However, it cannot be used to write to an arbitrary location.

  • Fixed CVE-2021-23240, a flaw in the temporary file handling of sudoedit's SELinux RBAC support. On systems where SELinux is enabled, a user with sudoedit permissions may be able to set the owner of an arbitrary file to the user-ID of the target user. On Linux kernels that support protected symlinks setting /proc/sys/fs/protected_symlinks to 1 will prevent the bug from being exploited. For more information, see Symbolic link attack in SELinux-enabled sudoedit.

  • Added writability checks for sudoedit when SELinux RBAC is in use. This makes sudoedit behavior consistent regardless of whether or not SELinux RBAC is in use. Previously, the sudoedit_checkdir setting had no effect for RBAC entries.

  • A new sudoers option selinux can be used to disable sudo's SELinux RBAC support.

  • Quieted warnings from PVS Studio, clang analyzer, and cppcheck. Added suppression annotations for PVS Studio false positives.

Major changes between version 1.9.4p2 and 1.9.4p1:

  • Fixed a bug introduced in sudo 1.9.4p1 which could lead to a crash if the sudoers file contains a runas user-specific Defaults entry. Bug #951.

Major changes between version 1.9.4p1 and 1.9.4:

  • Sudo on macOS now supports users with more than 16 groups without needing to set group_source to dynamic in sudo.conf. Previously, only the first 15 were used when matching group-based rules in sudoers. Bug #946.

  • Fixed a regression introduced in version 1.9.4 where sudo would not build when configured using the --without-sendmail option. Bug #947.

  • Fixed a problem where if I/O logging was disabled and sudo was unable to connect to sudo_logsrvd, the command would still be allowed to run even when the ignore_logfile_errors sudoers option was enabled.

  • Fixed a crash introduced in version 1.9.4 when attempting to run a command as a non-existent user. Bug #948.

  • The installed sudo.conf file now has the default sudoers Plugin lines commented out. This fixes a potential conflict when there is both a system-installed version of sudo and a user-installed version. GitHub Issue #75.

  • Fixed a regression introduced in sudo 1.9.4 where sudo would run the command as a child process even when a pseudo-terminal was not in use and the pam_session and pam_setcred options were disabled. GitHub Issue #76.

  • Fixed a regression introduced in sudo 1.8.9 where the closefrom sudoers option could not be set to a value of 3. Bug #950.

Major changes between version 1.9.4 and 1.9.3p1:

  • The sudoers parser will now detect when an upper-case reserved word is used when declaring an alias. Now instead of syntax error, unexpected CHROOT, expecting ALIAS the message will be syntax error, reserved word CHROOT used as an alias name. Bug #941.

  • Better handling of sudoers files without a final newline. The parser now adds a newline at end-of-file automatically which removes the need for special cases in the parser.

  • Fixed a regression introduced in sudo 1.9.1 in the sssd back-end where an uninitialized pointer could be freed on an error path. GitHub Issue #67.

  • The core logging code is now shared between sudo_logsrvd and the sudoers plugin.

  • JSON log entries sent to syslog now use minimal JSON which skips all non-essential whitespace.

  • The sudoers plugin can now produce JSON-formatted logs. The log_format sudoers option can be used to select sudo or json format logs. The default is sudo format logs.

  • The sudoers plugin and visudo now display the column number in syntax error messages in addition to the line number. Bug #841.

  • If I/O logging is not enabled but log_servers is set, the sudoers plugin will now log accept events to sudo_logsrvd. Previously, the accept event was only sent when I/O logging was enabled. The sudoers plugin now sends reject and alert events too.

  • The sudo logsrv protocol has been extended to allow an AlertMessage to contain an optional array of InfoMessage, as AcceptMessage and RejectMessage already do.

  • Fixed a bug in sudo_logsrvd where receipt of SIGHUP would result in duplicate entries in the debug log when debugging was enabled.

  • The visudo utility now supports EDITOR environment variables that use single or double quotes in the command arguments. Bug #942.

  • The PAM session modules now run when sudo is set-user-ID root, which allows a module to determine the original user-ID. Bug #944.

  • Fixed a regression introduced in sudo 1.8.24 in the LDAP back-end where sudoNotBefore and sudoNotAfter were applied even when the SUDOERS_TIMED setting was not present in ldap.conf. Bug #945.

  • Sudo packages for macOS 11 now contain universal binaries that support both Intel and Apple Silicon CPUs.

  • For sudo_logsrvd, an empty value for the pid_file setting in sudo_logsrvd.con will now disable the process ID file.

Major changes between version 1.9.3p1 and 1.9.3:

  • Fixed a regression introduced in sudo 1.9.3 where the configure script would not detect the crypt function if it was present in the C library, not an additional library.

  • Fixed a regression introduced in sudo 1.8.23 with shadow passwd file authentication on OpenBSD. BSD authentication was not affected.

  • Sudo now logs when a user-specified command-line option is rejected by a sudoers rule. Previously, these conditions were written to the audit log, but the default sudo log file. Affected command line arguments include -C (--close-from), -D (--chdir), -R (--chroot), -g (--group) and -u (--user).

Major changes between version 1.9.3 and 1.9.2:

  • sudoedit will now prompt the user before overwriting an existing file with one that is zero-length after editing. Bug #922.

  • Fixed building the Python plugin on systems with a compiler that doesn't support symbol hiding.

  • Sudo now uses a linker script to hide symbols even when the compiler has native symbol hiding support. This should make it easier to detect omissions in the symbol exports file, regardless of the platform.

  • Fixed the libssl dependency in Debian packages for older releases that use libssl1.0.0.

  • sudo and visudo now provide more detailed messages when a syntax error is detected in sudoers. The offending line and token are now displayed. If the parser was generated by GNU bison, additional information about what token was expected is also displayed. Bug #841.

  • Sudoers rules must now end in either a newline or the end-of-file. Previously, it was possible to have multiple rules on a single line, separated by white space. The use of an end-of-line terminator makes it possible to display accurate error messages.

  • Sudo no longer refuses to run if a syntax error in the sudoers file is encountered. The entry with the syntax error will be discarded and sudo will continue to parse the file. This makes recovery from a syntax error less painful on systems where sudo is the primary method of superuser access. The historic behavior can be restored by add error_recovery=false to the sudoers plugin's optional arguments in sudo.conf. Bug #618.

  • Fixed the sample_approval plugin's symbol exports file for systems where the compiler doesn't support symbol hiding.

  • Fixed a regression introduced in sudo 1.9.1 where arguments to the sudoers_policy plugin in sudo.conf were not being applied. The sudoers file is now parsed by the sudoers_audit plugin, which is loaded implicitly when sudoers_policy is listed in sudo.conf. Starting with sudo 1.9.3, if there are plugin arguments for sudoers_policy but sudoers_audit is not listed, those arguments will be applied to sudoers_audit instead.

  • The user's resource limits are now passed to sudo plugins in the user_info[] list. A plugin cannot determine the limits itself because sudo changes the limits while it runs to prevent resource starvation.

  • It is now possible to set the working directory or change the root directory on a per-command basis using the CWD and CHROOT options. There are also new Defaults settings, runchroot and runcwd, that can be used to set the working directory or root directory on a more global basis.

  • New -D (--chdir) and -R (--chroot) command line options can be used to set the working directory or root directory if the sudoers file allows it. This functionality is not enabled by default and must be explicitly enabled in the sudoers file.

Major changes between version 1.9.2 and 1.9.1:

  • Fixed package builds on RedHat Enterprise Linux 8.

  • The configure script now uses pkg-config to find the openssl cflags and libs where possible.

  • The contents of the log.json I/O log file is now documented in the sudoers manual.

  • The sudoers plugin now properly exports the sudoers_audit symbol on systems where the compiler lacks symbol visibility controls. This caused a regression in 1.9.1 where a successful sudo command was not logged due to the missing audit plugin. Bug #931.

  • Fixed a regression introduced in 1.9.1 that can result in crash when there is a syntax error in the sudoers file. Bug #934.

Major changes between version 1.9.1 and 1.9.0:

  • Fixed an AIX-specific problem when I/O logging was enabled. The terminal device was not being properly set to raw mode. Bug #927.

  • Corrected handling of sudo_logsrvd connections without associated I/O log data. This fixes support for RejectMessage as well as AcceptMessage when the expect_iobufs flag is not set.

  • Added an iolog_path entry to the JSON-format event log produced by sudo_logsrvd. Previously, it was only possible to determine the I/O log file an event belonged to using sudo-format logs.

  • Fixed the bundle IDs for sudo-logsrvd and sudo-python macOS packages.

  • I/O log files produced by the sudoers plugin now clear the write bits on the I/O log timing file when the log is complete. This is consistent with how sudo_logsrvd indicates that a log is complete.

  • The sudoreplay utility has a new -F (follow) command line option to allow replaying a session that is still in progress, similar to tail -f.

  • The @include and @includedir directives can be used in sudoers instead of #include and #includedir. In addition, include paths may now have embedded white space by either using a double-quoted string or escaping the space characters with a backslash.

  • Fixed some Solaris 11.4 compilation errors.

  • When running a command in a pty, sudo will no longer try to suspend itself if the user's tty has been revoked (for instance when the parent ssh daemon is killed). This fixes a bug where sudo would continuously suspend the command (which would succeed), then suspend itself (which would fail due to the missing tty) and then resume the command.

  • If sudo's event loop fails due to the tty being revoked, remove the user's tty events and restart the event loop (once). This fixes a problem when running sudo reboot in a pty on some systems. When the event loop exited unexpectedly, sudo would kill the command running in the pty, which in the case of reboot, could lead to the system being in a half-rebooted state.

  • Fixed a regression introduced in sudo 1.8.23 in the LDAP and SSSD back-ends where a missing sudoHost attribute was treated as an ALL wildcard value. A sudoRole with no sudoHost attribute is now ignored as it was prior to version 1.8.23.

  • The audit plugin API has been changed slightly. The sudo front-end now audits an accept event itself after all approval plugins are run and the I/O logging plugins (if any) are opened. This makes it possible for an audit plugin to only log a single overall accept event if desired.

  • The sudoers plugin can now be loaded as an audit plugin. Logging of successful commands is now performed in the audit plugin's accept function. As a result, commands are now only logged if allowed by sudoers and all approval plugins. Commands rejected by an approval plugin are now also logged by the sudoers plugin.

  • Romanian translation for sudo and sudoers from

  • Fixed a regression introduced in sudo 1.9.0 where sudoedit did not remove its temporary files after installing them. Bug #929.

  • Fixed a regression introduced in sudo 1.9.0 where the iolog_file setting in sudoers and sudo_logsrvd.conf caused an error if the file name ended in six or more X's.

Major changes between version 1.9.0 and 1.8.31p1:

  • Fixed a test failure in the strsig_test on FreeBSD.

  • The maximum length of a conversation reply has been increased from 255 to 1023 characters. This allows for longer user passwords. Bug #860.

  • Sudo now includes a logging daemon, sudo_logsrvd, which can be used to implement centralized logging of I/O logs. TLS connections are supported when sudo is configured with the --enable-openssl option. For more information, see the sudo_logsrvd, sudo_logsrvd.conf and sudo_logsrv.proto manuals as well as the log_servers setting in the sudoers manual.

    The --disable-log-server and --disable-log-client configure options can be used to disable building the I/O log server and/or remote I/O log support in the sudoers plugin.

  • The new sudo_sendlog utility can be used to test sudo_logsrvd or send existing sudo I/O logs to a centralized server.

  • It is now possible to write sudo plugins in Python 4 when sudo is configured with the --enable-python option. See the sudo_plugin_python manual for details.

    Sudo 1.9.0 comes with several Python example plugins that get installed sudo's examples directory.

    The sudo blog article What's new in sudo 1.9: Python includes a simple tutorial on writing python plugins.

  • Sudo now supports an audit plugin type. An audit plugin receives accept, reject, exit and error messages and can be used to implement custom logging that is independent of the underlying security policy. Multiple audit plugins may be specified in the sudo.conf file. A sample audit plugin is included that writes logs in JSON format.

  • Sudo now supports an approval plugin type. An approval plugin is run only after the main security policy (such as sudoers) accepts a command to be run. The approval policy may perform additional checks, potentially interacting with the user. Multiple approval plugins may be specified in the sudo.conf file. Only if all approval plugins succeed will the command be allowed.

  • Sudo's -S command line option now causes the sudo conversation function to write to the standard output or standard error instead of the terminal device.

  • Fixed a bug where if a #include or #includedir directive was the last line in sudoers and there was no final newline character, it was silently ignored. Bug #917.

  • It is now possible to use Cmd_Alias instead of Cmnd_Alias in sudoers for people who find the former more natural.

  • The new pam_ruser and pam_rhost sudoers settings can be used to enable or disable setting the PAM remote user and/or host values during PAM session setup.

  • More than one SHA-2 digest may now be specified for a single command. Multiple digests must be separated by a comma.

  • It is now possible to specify a SHA-2 digest in conjunction with the ALL reserved word in a command specification. This allows one to give permission to run any command that matches the specified digest, regardless of its path.

  • sudo and sudo_logsrvd now create an extended I/O log info file in JSON format that contains additional information about the command that was run, such as the host name. The sudoreplay utility uses this file in preference to the legacy log file.

  • The sudoreplay utility can now match on a host name in list mode. The list output also now includes the host name if one is present in the log file.

  • For sudo -i, if the target user's home directory does not exist, sudo will now warn about the problem but run the command in the current working directory. Previously, this was a fatal error. Debian bug #598519.

  • The command line arguments in the SUDO_COMMAND environment variable are now truncated at 4096 characters. This avoids an Argument list too long error when executing a command with a large number of arguments. Bug #923 and Debian bug #596631.

  • Sudo now properly ends the PAM transaction when the user authenticates successfully but sudoers denies the command. Debian bug #669687.

  • The sudoers grammar in the manual now indicates that sudoedit requires one or more arguments. Debian bug #571621.

  • When copying the edited files to the original path, sudoedit now allocates any additional space needed before writing. Previously, it could truncate the destination file if the file system was full. Bug #922.

  • Fixed an issue where PAM session modules could be called with the wrong user name when multiple users in the passwd database share the the same user-ID. Debian bug #734752.

  • Sudo command line options that take a value may only be specified once. This is to help guard against problems caused by poorly written scripts that invoke sudo with user-controlled input. Bug #924.